Distributed Replicated Storage Across Four Storage Nodes With GlusterFS On Fedora 12

This tutorial shows how to combine four single storage servers (running Fedora 12) to a distributed replicated storage with GlusterFS. Nodes 1 and 2 (replication1) as well as 3 and 4 (replication2) will mirror each other, and replication1 and replication2 will be combined to one larger storage server (distribution). Basically, this is RAID10 over network. If you lose one server from replication1 and one from replication2, the distributed volume continues to work. The client system (Fedora 12 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA.

High-Availability Storage With GlusterFS On Fedora 12 - Automatic File Replication (Mirror) Across Two Storage Servers

This tutorial shows how to set up a high-availability storage with two storage servers (Fedora 12) that use GlusterFS. Each storage server will be a mirror of the other storage server, and files will be replicated automatically across both storage servers. The client system (Fedora 12 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA.

Efficient High-Available LoadBalanced Cluster On CentOS 5.3 (Direct Routing Method)

This article explains how to set up an LVS cluster of load balanced virtual servers with Heartbeat and Ldirectord On CentOS 5.3.The load balancer sits between the user and two (or more) backend Apache/IIS web servers that hold the same content. Not only does the load balancer distribute the requests to the two backend Apache/IIS servers, it also checks the health of the backend servers. If one of them is down, all requests will automatically be redirected to the remaining backend server.

Distributed Replicated Storage Across Four Storage Nodes With GlusterFS On Ubuntu 9.10

This tutorial shows how to combine four single storage servers (running Ubuntu 9.10) to a distributed replicated storage with GlusterFS. Nodes 1 and 2 (replication1) as well as 3 and 4 (replication2) will mirror each other, and replication1 and replication2 will be combined to one larger storage server (distribution). Basically, this is RAID10 over network. If you lose one server from replication1 and one from replication2, the distributed volume continues to work. The client system (Ubuntu 9.10 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA.

High-Availability Storage With GlusterFS On Ubuntu 9.10 - Automatic File Replication (Mirror) Across Two Storage Servers

This tutorial shows how to set up a high-availability storage with two storage servers (Ubuntu 9.10) that use GlusterFS. Each storage server will be a mirror of the other storage server, and files will be replicated automatically across both storage servers. The client system (Ubuntu 9.10 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA.

Installation And Setup Guide For DRBD, OpenAIS, Pacemaker + Xen On OpenSUSE 11.1

The following will install and configure DRBD, OpenAIS, Pacemaker and Xen on OpenSUSE 11.1 to provide highly-available virtual machines. This setup does not utilize Xen's live migration capabilities. Instead, VMs will be started on the secondary node as soon as failure of the primary is detected. Xen virtual disk images are replicated between nodes using DRBD and all services on the cluster will be managed by OpenAIS and Pacemaker. The following setup utilizes DRBD 8.3.2 and Pacemaker 1.0.4. It is important to note that DRBD 8.3.2 has come a long way since previous versions in terms of compatibility with Pacemaker. In particular, a new DRBD OCF resource agent script and new DRBD-level resource fencing features. This configuration will not work with older releases of DRBD.

Setting Up A High-Availability Load Balancer (With Failover and Session Support) With HAProxy/Heartbeat On Debian Lenny

This article explains how to set up a two-node load balancer in an active/passive configuration with HAProxy and heartbeat on Debian Lenny. The load balancer sits between the user and two (or more) backend Apache web servers that hold the same content. Not only does the load balancer distribute the requests to the two backend Apache servers, it also checks the health of the backend servers. If one of them is down, all requests will automatically be redirected to the remaining backend server. In addition to that, the two load balancer nodes monitor each other using heartbeat, and if the master fails, the slave becomes the master, which means the users will not notice any disruption of the service. HAProxy is session-aware, which means you can use it with any web application that makes use of sessions (such as forums, shopping carts, etc.).

Distributed Replicated Storage Across Four Storage Nodes With GlusterFS On Debian Lenny

This tutorial shows how to combine four single storage servers (running Debian Lenny) to a distributed replicated storage with GlusterFS. Nodes 1 and 2 (replication1) as well as 3 and 4 (replication2) will mirror each other, and replication1 and replication2 will be combined to one larger storage server (distribution). Basically, this is RAID10 over network. If you lose one server from replication1 and one from replication2, the distributed volume continues to work. The client system (Debian Lenny as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86-64 servers with SATA-II RAID and Infiniband HBA.

Setting Up A High-Availability Load Balancer (With Failover And Session Support) With HAProxy/Keepalived On Debian Lenny

This article explains how to set up a two-node load balancer in an active/passive configuration with HAProxy and keepalived on Debian Lenny. The load balancer sits between the user and two (or more) backend Apache web servers that hold the same content. Not only does the load balancer distribute the requests to the two backend Apache servers, it also checks the health of the backend servers. If one of them is down, all requests will automatically be redirected to the remaining backend server. In addition to that, the two load balancer nodes monitor each other using keepalived, and if the master fails, the slave becomes the master, which means the users will not notice any disruption of the service. HAProxy is session-aware, which means you can use it with any web application that makes use of sessions (such as forums, shopping carts, etc.).

High-Availability Storage With GlusterFS On Debian Lenny - Automatic File Replication (Mirror) Across Two Storage Servers

This tutorial shows how to set up a high-availability storage with two storage servers (Debian Lenny) that use GlusterFS. Each storage server will be a mirror of the other storage server, and files will be replicated automatically across both storage servers. The client system (Debian Lenny as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86-64 servers with SATA-II RAID and Infiniband HBA.